Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2018 Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Service warning light

To reset the service light on a 2018 Peugeot 308, follow these steps: - Turn off the ignition if it is on; - Press and hold the button with the spanner symbol on the instrument cluster display; - Release the button when the countdown is complete; - Turn on the ignition. If the light does not reset, visit a garage for a diagnostic check to resolve the issue permanently. Remember to reset the service light only after performing the replacement and topping up operations as recommended.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Peugeot 308
How to reset the service indicator on the Peugeot 308
Peugeot 308 (2021-2026 / P5, MK 3) When the service light continues to appear on the display of your Peugeot 308 despite having already had a regular service, it means that it is neces…
How to Reset the Service Light on a Peugeot 308?
How to Reset the Service Light on a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To reset the Service light on a Peugeot 308, press and hold the button located on the right side of the instrument panel while it is off: continue ho…
How to Reset the "Service" Light on a Peugeot 308
How to Reset the "Service" Light on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos