Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Peugeot 107?

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: V-belt

To replace the serpentine belt on a Peugeot 107, open the bonnet to access the components inside the engine bay. Locate the serpentine belt at the bottom left side. Remove it from its housing by loosening the bolts of the tensioner pulley. Once the tension on the belt is reduced, fit the new belt around the respective pulleys, then reinstall the tensioner pulley and check that everything functions correctly.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Serpentine Belt and Its Accessories on a Peugeot 107 1.0
Replacing the Serpentine Belt and Its Accessories on a Peugeot 107 1.0
Peugeot 107 (2005-2014 / MK 1) In this guide, you will find instructions to remove and replace the serpentine belt and its accessories on a Peugeot 107 1.0, as well as on a Citroen…
How to Replace the Auxiliary Belt on a Peugeot 107 1.0
How to Replace the Auxiliary Belt on a Peugeot 107 1.0
Peugeot 107 (2005-2014 / MK 1) Below are the instructions to remove and replace the auxiliary belt on a Peugeot 107 1.0. First, lift the vehicle and start by removing the front rig…
How to replace the air filter of the Peugeot 107
How to replace the air filter of the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos