Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the central locking of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

Video tutorial

When the central locking of the Peugeot 206 does not work, it may be due to a generic electronic issue that requires a simple reset of the system: to perform this reset, disconnect the negative terminal of the battery. To do this, open the bonnet and locate the battery on the right side of the engine bay: here you can loosen the negative terminal clamp and leave it disconnected for a few minutes.

After this time, reconnect the clamp to check that the central locking functions correctly.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Disassembly of the lock and central locking system of the Peugeot 206.
Disassembly of the lock and central locking system of the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) Below we will see the main instructions that will allow us to disassemble and replace the lock and central locking of the Peugeot 206. First, we open…
How to Fix the Central Locking Issue on the Peugeot 206
How to Fix the Central Locking Issue on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, see how to fix the central locking issue on the Peugeot 206 that is no longer functioning properly. As we can see from the remote, the…
How to reprogram the remote key fob of a Peugeot 206
How to reprogram the remote key fob of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To reprogram the remote key fob of a Peugeot 206, get inside the vehicle, insert the key into the ignition switch and turn the ignition on without st…

    Frequently Asked Questions

    • 206 1998-2012 - What does the flashing STOP lamp mean on the Peugeot 206? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos