Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the I-Cockpit with Matt Glass on the Peugeot 2008

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Instrument cluster

See other generations:
Video tutorial

In this video, observe a warranty intervention on Peugeot 2008 models suffering from a defect: the glass has become completely opaque, making the instrumentation unreadable. Watch how Peugeot technicians handle the replacement: remove the upper flaps concealing the screws, then use a plastic spatula to take off the lower profile.

Disconnect the electrical connections, and the entire piece comes away easily. Fit the new piece, starting with the electrical connections, then reattach the flaps and the profile, but electronic coding is required, which is done in a few minutes.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to improve the visibility of the opaque display on the Peugeot 2008
How to improve the visibility of the opaque display on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this video, we see how to overcome the problem of the plastic glass on the dashboard of the Peugeot 2008 becoming opaque, making the display less …
Is it possible to display the navigator on the 3D i-cockpit of the Peugeot 2008?
Is it possible to display the navigator on the 3D i-cockpit of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Let's see how unfortunately it is still not possible to display the navigator on the i-cockpit of the Peugeot 2008, despite some videos and images su…
How to Change the Language on a Peugeot 2008 Cockpit
How to Change the Language on a Peugeot 2008 Cockpit
Peugeot 2008 (2019-2026 / MK 2) In this video, we will see how to change the language on the multimedia screen of a Peugeot vehicle; in this case, it is a 2008, but the same system …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos