Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to open the hood of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance
Operation: How to open the hood of the Peugeot 206

In this guide we will see the instructions that will allow us to open the engine hood of the Peugeot 206, following these simple steps. First of all, we open the front driver's side door and start pulling the lever that we find at the bottom, next to the pedals; then we move to the front of the car and go to release the latch located between the engine hood and the bumper grille, as shown in the video. At this point we raise the engine hood and secure the rod to lock it; now we lower the engine hood to close it, letting it drop from a certain height.


Posted on 29 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - What problem can there be on the front seat of the Peugeot 206 3-door? Read Answer
    • 206 1998-2012 - Why is the panoramic roof of the Peugeot 206 stuck? Read Answer
    • 206 1998-2012 - What is the engine warning light in the Peugeot 206? Read Answer
    • 206 1998-2012 - Why does the engine light turn on in the Peugeot 206? Read Answer
    • 206 1998-2012 - Has the Peugeot 206 1.4 hdi had any issues in the past? Read Answer
    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read Answer
    • 206 1998-2012 - What does the STOP warning light on the Peugeot 206 indicate? Read Answer
    • 206 1998-2012 - Why does the Peugeot 206 have engine starting problems? Read Answer
    • 206 1998-2012 - Why did the horn in the Peugeot 206 stop working? Read Answer
    • 206 1998-2012 - What problems has the Peugeot 206 1.4 HDi had in the past? Read Answer
    • 206 1998-2012 - What possible problems could the central locking system of the Peugeot 206 present? Read Answer
    • 206 1998-2012 - Why do the indicators on Peugeot 206 no longer work? Read Answer
    • 206 1998-2012 - Why does the Peugeot 206 light switch give problems? Read Answer
    • 206 1998-2012 - Where is the fuse diagram located, in the Peugeot 206 1.4 HDi? Read Answer
    • 206 1998-2012 - What problem does the Peugeot 206 power steering have? Read Answer
    • 206 1998-2012 - What problems does the Peugeot 206 float have? Read Answer
    • 206 1998-2012 - Why did the air conditioner fan stop working on Peugeot 206? Read Answer
    • 206 1998-2012 - Where is the key to change the wheel of the Peugeot 206? Read Answer
    • 206 1998-2012 - What does the "STOP" warning light on the Peugeot 206 indicate? Read Answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos