Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to deactivate the eco mode of the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance
Operation: How to deactivate the eco mode of the Peugeot 206

In this video, it is shown how to deactivate the eco mode of the Peugeot 206. To deactivate it, you must open the hood, remove the positive pole of the battery, wait 1 minute, once finished reconnect the positive pole of the battery, then get in the car, insert the key, turn it one click and wait 30 seconds, after the 30 seconds turn off and wait 3 seconds, at the end of the 3 seconds repeat the procedure 4 more times for a total of 5 times. Once this step is completed, turn off the ignition again and then start the engine. Now by turning on the engine the process will be complete and the car will no longer have the eco mode.


Posted on 11 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - What problem can there be on the front seat of the Peugeot 206 3-door? Read Answer
    • 206 1998-2012 - Why is the panoramic roof of the Peugeot 206 stuck? Read Answer
    • 206 1998-2012 - What is the engine warning light in the Peugeot 206? Read Answer
    • 206 1998-2012 - Why does the engine light turn on in the Peugeot 206? Read Answer
    • 206 1998-2012 - Has the Peugeot 206 1.4 hdi had any issues in the past? Read Answer
    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read Answer
    • 206 1998-2012 - What does the STOP warning light on the Peugeot 206 indicate? Read Answer
    • 206 1998-2012 - Why does the Peugeot 206 have engine starting problems? Read Answer
    • 206 1998-2012 - Why did the horn in the Peugeot 206 stop working? Read Answer
    • 206 1998-2012 - What problems has the Peugeot 206 1.4 HDi had in the past? Read Answer
    • 206 1998-2012 - What possible problems could the central locking system of the Peugeot 206 present? Read Answer
    • 206 1998-2012 - Why do the indicators on Peugeot 206 no longer work? Read Answer
    • 206 1998-2012 - Why does the Peugeot 206 light switch give problems? Read Answer
    • 206 1998-2012 - Where is the fuse diagram located, in the Peugeot 206 1.4 HDi? Read Answer
    • 206 1998-2012 - What problem does the Peugeot 206 power steering have? Read Answer
    • 206 1998-2012 - What problems does the Peugeot 206 float have? Read Answer
    • 206 1998-2012 - Why did the air conditioner fan stop working on Peugeot 206? Read Answer
    • 206 1998-2012 - Where is the key to change the wheel of the Peugeot 206? Read Answer
    • 206 1998-2012 - What does the "STOP" warning light on the Peugeot 206 indicate? Read Answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos