Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to replace the gear knob in the Peugeot 508?

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 2 - Years 2018-2024
Part: Gear Shift Knob
Operation: How to replace the gear knob in the Peugeot 508?

In this tutorial we can see how to replace the gear knob in the Peugeot 508, an extremely simple and quick operation. First of all, let's go inside the cabin, then, using a preferably plastic spatula so as not to leave any marks, we unclip the upper cover of the knob. We then unscrew the fixing screw indicated with a cross-tip screwdriver, pull the knob upwards and separate it from the shaft. At this point, also remove the boot, if necessary, insert the replacement parts and reassemble everything following the reverse procedure.


Posted on 15 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos