Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin filter of a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Cabin air filter

In this video we see where to find and how to change the cabin air filter of a Peugeot 3008: the filter is located under the glove compartment, positioned in the passenger footwell. We will need to remove a plastic partition (to which an electrical plug is also attached) and then also remove the one located on the front side of the center console. At the highest point, at the junction of the two partitions, we will find a plastic cover placed vertically on the left. We will unclip the clips and then access the filter. We will clean the compartment with a blast of compressed air or a cloth, in order to remove dust and residue, and place the new filter in its place, paying attention to the installation direction. Now we can close the cover and reassemble the partitions. Job done.

Posted on 17 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter in a Peugeot 3008
Replacing the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this video tutorial, you will learn how to remove and replace the cabin air filter in a Peugeot 3008. The cabin filter is located on the passenger…
How to Replace the Cabin Air Filter in a Peugeot 3008
How to Replace the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right side of the glove compartment (unscrew the se…
How to Replace the Cabin Filter on a Peugeot 3008
How to Replace the Cabin Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How do you replace the cabin filter on a Peugeot 3008? Open the door and enter the cabin. Use a plastic lever to detach the trim located at the side …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos