Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the cabin air filter on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

To ensure a constant flow of clean air in the cabin of the Peugeot 3008, you should periodically replace the designated filter. Position yourself in the front passenger seat and unscrew the screw that secures the panel of the centre tunnel under the dashboard.

Release the pressure clips holding the panel under the glove compartment and remove it after disconnecting the courtesy light connector, open the glove compartment and unscrew the two screws that secure the tray and remove it from below. Working in the area of the centre tunnel that has been cleared, unclip the tray and move it to the left to access the cover of the filter box. Open it and pull out the old filter element by gripping the tabs, and replace it with a new one, ensuring the flow direction is correct.

Close the cover and reassemble everything by reversing the previous steps.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

Peugeot 3008 (2016-2023 / P84, MK 2) In the following guide dedicated to all of you who own a 2016 Peugeot 3008, we will help you complete the replacement of the cabin air filter. Before…
Peugeot 3008 (2016-2023 / P84, MK 2) Today's instructions will allow us to replace the cabin air filter of the Peugeot 3008. First, we open the front door on the passenger side and start…
Peugeot 3008 (2009-2016 / MK 1, T84) Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - What to do in the event of a fault with the esp asr system on the Peugeot 3008? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos