Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the air filter of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Air filter

For optimal engine performance, it is important to periodically replace the air filter of the Peugeot 207. To do this, open the hood of the engine compartment, loosen the clamp of the outlet tube of the filter box and disconnect the small vent tube, unscrew the bolt near the inlet tube and disconnect it. Remove the entire box and unscrew the screws that secure the cover, open it and remove the old filter element replacing it with a new one, making sure the rubber edge adheres well. Close the cover by tightening the screws, put the box back in its position, reconnect the tubes, screw the front bolt and tighten the clamp of the outlet tube.

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Air filter replacement for the Peugeot 207
Air filter replacement for the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) One operation to be carried out during the service of the Peugeot 207 is the replacement of the air filter mounted on the engine intake. To do this, …
How to Replace the Air Filter on the Peugeot 207
How to Replace the Air Filter on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the air filter on a Peugeot 207 is a simple and quick task that you can do yourself, aided by our video tutorial. Start the replacement by …
Replacing the Diesel Filter on a Peugeot 207
Replacing the Diesel Filter on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Change the fuel filter as stated in the manual every certain number of miles. Replacing the diesel filter on a Peugeot 207. Lift the front bonnet and…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos