Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Disassembly of the door panel on Peugeot 508

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Door panel
Operation: Disassembly of the door panel on Peugeot 508

Regarding the front doors: open the front door. Remove the plastic cover on the handle. Unscrew the fixing screws with a Torx T30 screwdriver, remove the screws under the cover. Disconnect the electrical connector of the switch panel. Lever the sides of the panel to release it. At this point you will be able to remove the door panel, being careful with the handle cable (disconnect it without damaging it). As for the rear doors: remove the plastic handle cover. Unscrew the fixing screws, remove the additional side screws. At this point, disconnect the window regulator motor and you're done.


Posted on 10 May 2024 by ScegliAuto



How to remove the rear door panel on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do we remove the rear left side door panel of a Peugeot 508? Let's see together in this video how to proceed. Before starting the disassembly wor
How to disassemble the door panel of the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) Below we will see the steps that will allow us to disassemble the front door panel and the speaker of the Peugeot 508. First, we open the front door
Disassembly of the external rearview mirror of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Briefly, we will see the instructions that will allow us to dismantle and replace the external rearview mirror of the Peugeot 508, following these si

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos