Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear door trim panel in the Peugeot 508 SW?

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to proceed with the disassembly of the door panel of the Peugeot 508 sw. In this video, the work in question is a fundamental step to reach the replacement of the electric window regulator, so let's proceed: Remove the handle cover with a small flathead screwdriver and then the handle itself, then extract the side rivets of the panel and pull it forcefully to detach it, finally remove the window switch, remembering to disconnect its rear connector.

Job done.


Posted on 4 April 2025 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Peugeot 508
How to Remove the Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To remove the door panel on a Peugeot 508, use a lever tool to detach the trim covering the internal handle; you will also need to pry and pull out t…
How to Remove the Door Panel on the Peugeot 508?
How to Remove the Door Panel on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To remove the door panel on the Peugeot 508, use a tool to pry off the trim of the armrest: once this trim is removed, you will be able to locate all…
How to Remove the Door Panel on a Peugeot 508?
How to Remove the Door Panel on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) To remove the door panel on a Peugeot 508, use a tool to pry off the trim surrounding the internal handle. You will also need to pry and pull out the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos