Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to disassemble the rearview mirror of a Peugeot 308?

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 2, T9 - Years 2013-2021
Part: Outside rearview mirror
Operation: How to disassemble the rearview mirror of a Peugeot 308?

To disassemble the rearview mirror of a Peugeot 308, start by removing the mirror cover. Use a plastic tool to avoid damage and gently pry on the edges of the cover until it comes off. Once the cover is removed, access the screws that secure the mirror to the support. Unscrew these screws with a suitable screwdriver, holding the mirror with one hand to prevent it from falling. After removing the screws, locate the electrical connector that connects the mirror to the car system. Disconnect it carefully by pressing the lock and gently pulling the connector. Now you can completely remove the rearview mirror from the door of your Peugeot 308. Make sure to follow these steps carefully to avoid damage to both the mirror and the body of the car.


Posted on 18 May 2024 by ScegliAuto



How to disassemble the external rearview mirror of the Peugeot 308.
Peugeot 308 (2007-2014 / T7, MK 1) Today's guide will show us how to disassemble and replace the external rearview mirror of the Peugeot 308, following the instructions below. First, w
Replacement of the external rearview mirror of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) Today's instructions will show us how to disassemble and replace the external rearview mirror of the Peugeot 308. First, we open the front door and s
How to replace the external rearview mirror of the Peugeot 308 t9
Peugeot 308 (2013-2021 / MK 2, T9) The guide shows how to disassemble the external rearview mirror of the Peugeot 308 t9. The first operation to be carried out is to remove the mirror

    Frequently Asked Questions

    • 308 2013-2021 - Why don't the mirrors of the Peugeot 308 open? Read Answer
    • 308 2007-2014 - What to do if the mirrors of the Peugeot 308 do not open? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos