Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

An error code on Peugeot 207 that prevents the engine from starting

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Warning light – error code

In this video we see a Peugeot 207 that starts but does not start, running very slowly, and giving an error during diagnosis: error P0335, checked with the scanning tool attached to the EOBD socket. This is an error related to the crankshaft, so to reach this sensor it is necessary to remove the front right wheel. Once the wheel is removed and the car is slightly lifted, we can see that the connector is loose compared to its normal position, so just reposition it correctly and put the wheel back in place. Of course, we clear the error. We then do a test run and see that the car starts without difficulty.

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Radio on a Peugeot 207
How to Unlock the Radio on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, see how to unlock the standard radio on a Peugeot 207, as well as on other models from the Peugeot-Citroen group. First, get …
How to unlock the stereo of the Peugeot 207
How to unlock the stereo of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) If the stereo of your Peugeot 207 is locked, you may need to enter an unlock code to reactivate it. This can happen, for example, after disconnecting…
How do you reset the BSI unit of the Peugeot 207?
How do you reset the BSI unit of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to reset the BSI unit of the Peugeot 207, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port can be foun…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - What does the steering wheel warning light indicate in the Peugeot 207? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos