Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the SMEG with the NAC in the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Onboard computer

See other generations:
Video tutorial

Start the replacement by removing the previous onboard computer. First, unscrew the two side screws that secure the centre console, then remove the console itself.

Once the console is removed, extract the CD player by disconnecting it from its connector, then proceed to dismantle the onboard computer. Use a plastic lever to remove the fans on the sides, then take out the onboard computer by disconnecting it from its connector.

Now, install the new onboard computer into the previous housing, using the same connectors where possible. Change the antenna cable as shown in the video, then reassemble everything.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the SMEG System in a Peugeot 308
How to Replace the SMEG System in a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this tutorial, you will see how to replace the onboard computer, known as SMEG, in the Peugeot 308, which is necessary if you intend to install a …
How to Change the Splash Screen on the SMEG of a Peugeot 308
How to Change the Splash Screen on the SMEG of a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To perform this operation, you need a USB drive with images saved in JPEG format. Insert the USB drive into one of the car's USB ports before turning…
Replace Steering Wheel on Peugeot 308
Replace Steering Wheel on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Remove the steering wheel and airbag from the Peugeot 308 if damaged. Insert the removal keys into the slots at the back of the steering wheel and un…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos