Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the SMEG System in a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Onboard computer

See other generations:
Video tutorial

In this tutorial, you will see how to replace the onboard computer, known as SMEG, in the Peugeot 308, which is necessary if you intend to install a new module capable of receiving DAB signals. Start by unclipping the central plastic panel where some of the various controls are located, then disconnect the connector and unscrew the two fixing screws of the CD player using a Torx T20 spanner.

Next, disconnect the blue connector, remove the lower module, and proceed with the replacement by following the reverse procedure. Remember to reconnect the CD player to the new module.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Change the Splash Screen on the SMEG of a Peugeot 308
How to Change the Splash Screen on the SMEG of a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To perform this operation, you need a USB drive with images saved in JPEG format. Insert the USB drive into one of the car's USB ports before turning…
How to activate the Cruise Control of the Peugeot 308
How to activate the Cruise Control of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today we will explain how to activate the traction control system on a Peugeot 308 vehicle. To activate the system, we get on board the vehicle and p…
How to replace the SMEG with the NAC in the Peugeot 308
How to replace the SMEG with the NAC in the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Start the replacement by removing the previous onboard computer. First, unscrew the two side screws that secure the centre console, then remove the c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos