Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the partial odometer of the Peugeot 206 CC?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Warning light – error code

In order to reset the partial odometer of the Peugeot 206 CC, you need to turn on the instrument panel by inserting the ignition key into the ignition switch: once this is turned on, you can press the button located on the right side of the instrument panel until the kilometers traveled since the last reset are displayed. Once this screen is shown, you can proceed by holding down the same button to reset the partial odometer; at the end of the reset, you can turn off the instrument panel.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 206 CC
How to Reset the Service Light on a Peugeot 206 CC
Peugeot 206 (1998-2012 / MK 1) Let's see how to reset the service light on a Peugeot 206: Turn off the ignition (remove the key or press the Stop button if it is a keyless version)…
How to Reset the Warning Light on a Peugeot 206
How to Reset the Warning Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you have just serviced your Peugeot 206 but the warning light continues to stay on, you need to perform the following reset to eliminate it perman…
Resetting the Service Light on a Peugeot 206
Resetting the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) When it's time to change the engine oil in a Peugeot 206, a warning appears on the instrument panel to remind you. After completing the necessary tas…

    Frequently Asked Questions

    • 206 1998-2012 - Why did the ABS warning light come on in the Peugeot 206? Read answer
    • 206 1998-2012 - How to fix the airbag fault warning light on Peugeot 206? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos