Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's main instructions will show us how to perform a basic carburetion, which will then be completed by performing various tests with the engine running, on the Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, we put the center stand and remove the right side toolbox; then we remove the carburetor box cover, thus accessing the carburetion screw found on the side, as shown in the video. At this point, we tighten the screw completely and then give it a turn and a half; from here we will then make the final adjustments, acting if necessary on the jets and on the idle adjustment.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Carburettor of the Piaggio Vespa PX 125?
How to Adjust the Carburettor of the Piaggio Vespa PX 125?
Vespa Px 125 To adjust the carburettor of the Piaggio Vespa PX 125, locate the bolt at the rear of the carburettor. Here, you will be able to tighten the bolt wit…
How to Remove the Carburettor from the Piaggio Vespa PX 125 - PX 200
How to Remove the Carburettor from the Piaggio Vespa PX 125 - PX 200
Vespa Px 125 Follow the instructions below to remove the carburettor from the Piaggio Vespa PX 125, as well as the PX 200. First, put the central stand down and s…
How to Remove the Carburettor on Vespa PX 125 - LML Star 125 2T
How to Remove the Carburettor on Vespa PX 125 - LML Star 125 2T
Vespa Px 125 Watch this video for the main steps to remove and replace the original carburettor on a Vespa PX 125, as well as on the LML Star 125 2-stroke. First,…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos