Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here are the instructions for disassembling and replacing the instrument cluster or speedometer on the Piaggio Vespa PX 125. First, place the central stand and begin to disassemble and remove any rear-view mirrors by unscrewing the nuts found on the handlebar cover. Once the cover is removed, you can also take out the instrument cluster by disconnecting the electrical connector and the speedometer cable, as shown in the video. At this point, carry out the repair or replacement of the speedometer, and finally reassemble the handlebar cover.

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
Vespa Px 125 This guide explains how to remove and replace the speedometer drive cable on the Piaggio Vespa PX 125, as well as the PX 200 and PK 50. First, discon…
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Vespa Px 125 Below are the instructions for removing and replacing the front headlamp bulb on a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, pla…
How to Replace the Front Light of the Piaggio Vespa PX 125
How to Replace the Front Light of the Piaggio Vespa PX 125
Vespa Px 125 These brief and simple steps will allow you to remove and replace the front light of the Piaggio Vespa PX 125. First, put down the centre stand and s…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos