Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer Cable on the Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125

Video tutorial

This guide explains how to remove and replace the speedometer drive cable on the Piaggio Vespa PX 125, as well as the PX 200 and PK 50. First, disconnect the speedometer cable from the front wheel by unscrewing the screw; then unscrew the handlebar screws, removing the mirror first, as shown in the video.

At this point, disconnect the speedometer cable from the dashboard by pulling it out and replacing it with the new one; insert it correctly until it reaches the wheel, following the video to the end for reassembly!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Disassembly and Replacement of the Speedometer on Piaggio Vespa PX 125
Disassembly and Replacement of the Speedometer on Piaggio Vespa PX 125
Vespa Px 125 Here are the instructions for disassembling and replacing the instrument cluster or speedometer on the Piaggio Vespa PX 125. First, place the central…
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Vespa Px 125 Below are the instructions for removing and replacing the front headlamp bulb on a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, pla…
How to replace the clutch cable of the Piaggio Vespa PX 125
How to replace the clutch cable of the Piaggio Vespa PX 125
Vespa Px 125 Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Piaggio Vespa PX 125, as well as the PX…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos