Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Porsche Cayman

Model: Porsche Cayman 987 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

When the conditions set by the Porsche Cayman control system for oil and filter replacement are met, a message will appear on the display reminding you to carry out the operation. After completing the necessary tasks, reset the control system.

Obtain the POR v1.0 device from www.diagnostic-world.com for £99, connect it via the OBD2 port, turn on the ignition, select "reset oil" on the POR v1.0, choose manual, then select the model and year of the car. On the next screen, select the mixture unit and by pressing OK, the reset will begin.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Porsche Cayman
How to Replace the Key Battery on a Porsche Cayman
Porsche Cayman (2006-2012 / 987) In this new mini guide, learn how to correctly replace the key battery on your Porsche Cayman. Once you have purchased a new CR2032 3V battery, take …
How to Remove the Engine Cover on Porsche Cayman
How to Remove the Engine Cover on Porsche Cayman
Porsche Cayman (2006-2012 / 987) On the Porsche Cayman, accessing the engine for maintenance is not straightforward. First, remove the grille located above the engine cover by simply…
How to Replace the Key Battery of the Porsche Cayman
How to Replace the Key Battery of the Porsche Cayman
Porsche Cayman (2006-2012 / 987) Replacing the battery in your Porsche Cayman key is very simple and takes only a few seconds. Let's go through the steps. First, pull out the physica…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos