Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Window Switch Panel on a Dodge Ram

Model: RAM 1500 DS, DJ, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Power window switch

See other generations:
Video tutorial

Learn how to remove and replace the window switch panel located in the door panel of a Dodge Ram. Disconnect the battery terminals for safety, then use a plastic pry tool to remove the window switch button. Use the pry tool to remove the frame with the buttons (disconnect the power connector).

Finally, install the new switch panel kit into the door panel: connect the power connectors and push the switch panel into the housing until it locks in place with the plastic clips. Test the button's functionality after installation.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Switch on the Dodge RAM 1500
How to Replace the Headlight Switch on the Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) Follow this guide to remove and replace the headlight switch for the front and rear lights on the Dodge RAM 1500. First, get inside the vehicle and s…
Removing the Left Front Panel on a Dodge Ram
Removing the Left Front Panel on a Dodge Ram
RAM 1500 (2019-2026 / MK 5, DT) Using a small flathead screwdriver or a plastic wedge, remove the cover behind the door handle and the one behind the center grab handle. Most of the…
Where can I find the fuse diagram for the Dodge Ram?
Where can I find the fuse diagram for the Dodge Ram?
RAM 1500 (2009-2019 / DS, DJ, MK 4) The fuse layout, or rather the fuse box, of Dodge Ram vehicles, specifically the 2016 Dodge Ram 1500, is an electrical diagram that allows you to eas…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos