Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the EGR valve on the Dodge RAM 1500?

Model: RAM 1500 DR, D1, MK 3, DM, DC, DH - Years 2002-2009
Part: Valve

In order to replace the EGR valve of the Dodge RAM 1500 you have to open the hood and remove all the screws that secure the air filter box, which will have to be moved giving access to the lower components. The EGR valve will be located in the area below, between the intake manifold and the exhaust manifold: to be able to remove it, it will be necessary to unhook its fixing rings and unscrew the relative bolts. Once the valve has been released, it will be possible to remove it from its housing and replace it with a new spare part. After installation, you will also need to re-attach the air filter box.

Posted on 16 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / BE, BR, MK 2) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…
Diagram of the fuse box of the 2003 Dodge Ram 1500.
Diagram of the fuse box of the 2003 Dodge Ram 1500.
RAM 1500 (2002-2009 / DR, D1, MK 3, DM, DC, DH) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the fuse box locations, the video also shows a diagram of …
How to reset the oil warning light on the Dodge RAM 1500
How to reset the oil warning light on the Dodge RAM 1500
RAM 1500 (2002-2009 / DR, D1, MK 3, DM, DC, DH) The procedure required to manually reset the oil change light on the 2008 Dodge RAM 1500 is really simple and can be done by anyone on their own. The…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos