Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on the RAM 1500 5.7 V8

Model: RAM 1500 DJ, DS, MK 4 - Years 2009-2019
Part: Spark plugs

Today we will see, in this video tutorial, the step by step instructions to remove and replace the spark plugs of the RAM 1500 engine, with 5.7 V8 engine. First we open the engine hood and start by disassembling and removing the air filter box; to do this, unscrew the screws of the suction duct clamps, then disconnecting the electrical connector of the mass air flow sensor. At this point we disconnect the spark plug connectors and use a socket wrench with extension to unscrew and remove them; then we screw the new ones by hand, of the right type, and then tighten them with a wrench!

Posted on 18 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the RAM 1500 spark plugs?
How do you replace the RAM 1500 spark plugs?
RAM 1500 (2002-2009 / DR, DM, DC, D1, DH, MK 3) In order to replace the RAM 1500 spark plugs, you need to access the components located in the lower part of the engine compartment, in order to disc…
Where are the fuses of the new RAM 1500
Where are the fuses of the new RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) If you intend to intervene directly on one or more fuses of your new RAM 1500 fifth series (year 2013) but you don't know where they are then you jus…
Where is the fuse box of the RAM 1500 located?
Where is the fuse box of the RAM 1500 located?
RAM 1500 (1994-2001 / BE, MK 2, BR) Thanks to the following procedure, you will be able to find the box containing all the fuses of your RAM 1500 in a few seconds and, above all, in tot…

Other guides you may be interested in

How to reset the tyre pressure light on the Kia Sportage?

To reset the tyre pressure light on the Kia Sportage, there is no specific procedure to follow. You need to identify which tyres are under-inflated and inflate them to the correct pressure. The correct pressure value is indicated on the sticker attached to the driver's door pillar. Once all the tyres have been inflated, wait for the pressure sensors to read the new values. You may need to drive a short distance: as soon as the new value is detected, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos