Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight switch on the Dodge RAM 1500

Model: RAM 1500 BR, BE, MK 2 - Years 1994-2001
Part: Push button

Let's see in this guide how to remove and replace the buttons or the ignition switch of the front and rear lights of the Dodge RAM 1500. First we get on board the car and start by disassembling and removing the plastic bulkhead of the central instrumentation; after which we unscrew the screws of the cup holder to remove it, as shown in the video. At this point, unscrew the side screws of the switch to remove it, disconnecting the electrical connector on the back; let's replace it with the original spare part and reassemble the instrumentation again!

Posted on 25 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to install a headlight protective film on a Dodge Ram 1500
How to install a headlight protective film on a Dodge Ram 1500
RAM 1500 (2019-2026 / MK 5, DT) This video will demonstrate the installation of a headlight protective film on a Dodge Ram 1500. You will need to obtain a headlight protection kit, …
Diagram of the fuse box of the 2003 Dodge Ram 1500.
Diagram of the fuse box of the 2003 Dodge Ram 1500.
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the fuse box locations, the video also shows a diagram of …
Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / BR, BE, MK 2) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…

How to Replace the Spark Plugs on a Saab 9-3

Release the bonnet from the appropriate lever and lift it. Now you will need access to the area beneath the upper engine cover, so remove it by unscrewing the bolt that secures it. After removing it, you will have access to the coils where the spark plug is located for each coil. Unscrew the bolts that secure each individual coil and extract it; this will allow you to remove the spark plug from the tip of the coil. Now, all you need to do is position the new spark plugs and retrace your steps to reassemble the various components.

Watch the video!


by ScegliAuto

More videos