Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil on Dodge Ram 6.7 Diesel

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: Engine oil

In this video tutorial we will see how to change the oil on a Dodge Ram 2500 6.7 liter Diesel engine. First we have to go under the vehicle and place a basin under the oil pan to collect the old oil, unscrew the nut of the sump and let all the used oil out, letting it drain well. The oil filter to be replaced is located under the airbox tube, to remove it just unscrew it and replace it with a new filter. Once this is done, we can put the oil pan cap back on and add new oil by checking the level using the oil dipstick.

Posted on 2 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil change light on the Dodge RAM 2500
How to reset the oil change light on the Dodge RAM 2500
RAM 2500 (2019-2026 / MK 5, DT) In this our new mini guide we will explain how to reset the alarm light relating to the oil change in the new Dodge RAM 2500 in a simple and quick wa…
How to reset the oil warning light on the Dodge RAM 2500
How to reset the oil warning light on the Dodge RAM 2500
RAM 2500 (2019-2026 / MK 5, DT) Manually resetting the Dodge RAM 2500 engine oil change light is really very simple and the whole procedure takes a few seconds to complete even if y…
How to change the engine oil and its filter on the Dodge RAM 2500 Mk4
How to change the engine oil and its filter on the Dodge RAM 2500 Mk4
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) The guide shows you how to change the oil on the Dodge RAM 2500 Mk4. To carry out this operation it is necessary to empty the engine oil tank with a …

Other guides you may be interested in

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos