Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery on a Ram 2500

Model: RAM 2500 BE, MK 2, BR - Years 1994-2001
Part: Key

The Ram 2500 key is characterized by a very simple and minimalist design which simplifies, quite a bit, the operations necessary to replace the button cell inside. The steps to perform are as follows. Get yourself a screwdriver with a flat head and insert the latter into the gap that is created between the upper and lower covers. Make a slight push upwards and separate the two parts. Now that you have access to the exhausted battery, all you have to do is remove it and replace it with a new compatible model. Finally, reassemble the cover correctly.

Posted on 5 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the RAM 2500 remote control
How to replace the battery of the RAM 2500 remote control
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) If the remote control of your RAM 2500 (year 2013-2018) has suddenly stopped working and you want to find out how to correctly replace the battery, t…
How do I replace the RAM 2500 license plate light bulb?
How do I replace the RAM 2500 license plate light bulb?
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) In order to replace the RAM 2500 license plate light bulb, you need to access the inside of the rear bumper so that you can disconnect the connector …
How do you replace the battery of the RAM 2500?
How do you replace the battery of the RAM 2500?
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) In order to replace the battery of the RAM 2500 you have to open the hood so that you can access the components inside the engine compartment. Once t…

Other guides you may be interested in

How to Replace the Door Panels on an Audi A3

First, open the door in question. Using a plastic trim tool, start lifting the indicated parts in the video, namely the small panel above the armrest, the one near the handle, and the one next to the window switch. This will allow you to unscrew all the bolts behind these panels and proceed to remove the panel by lifting it off the clips that hold it, starting from the bottom. Now, disconnect the connectors at the back, and you're done. Retrace your steps to reassemble the various components.

Watch the video!


by ScegliAuto

More videos