Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on RAM Promaster Rapid

Model: RAM Promaster Rapid MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

In this video tutorial, you will see how to reset the oil light on the RAM Promaster Rapid by following simple steps. When the oil change light comes on and the display shows this message: (Oil change required), the first thing to do is perform an oil change and replace the filter.

After completing the DIY service, get in your vehicle, insert the key, and turn on the ignition. Press the accelerator pedal three times; turn off the ignition and remove the key. Then, insert the key again and turn on the ignition to check that the maintenance light has turned off. Reset complete.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the 2020 Ram Promaster Rapid?
Where is the fuse box located in the 2020 Ram Promaster Rapid?
RAM Promaster Rapid (2015-2024 / MK 1) The difference in the location of the fuse boxes between the Ram Promaster and the Ram Promaster Rapid is negligible. They are both located in the en…
Where to Find the Inertia Switch on the RAM Promaster Rapid
Where to Find the Inertia Switch on the RAM Promaster Rapid
RAM Promaster Rapid (2015-2024 / MK 1) In this video, see the location of the inertia switch on a RAM Promaster Rapid: this vehicle has been in an accident and now won't start. The YouTube…
How to Time the Engine of the Ram Promaster Rapid
How to Time the Engine of the Ram Promaster Rapid
RAM Promaster Rapid (2015-2024 / MK 1) To time the engine of the Ram Promaster Rapid, open the hood to access the components inside the engine bay. You will find the cylinder head, which m…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos