Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glass and Bulb of the Side Mirror on a Ram ProMaster City?

Model: RAM Promaster City MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Side mirror

Video tutorial

For both replacements, the first step is the same: fully open the side mirror outward from the vehicle and then move the glass to create enough space to insert your fingers from the lower right corner. Using just your hands, detach the glass held in place by three clips.

Look at the lower left: you will find the bulb housing for the mirror. Remove the socket, replace the bulb, and then reposition it in its place.

Finally, install the new reflective surface of the side mirror and put it back in its original position.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light Fixture Cover of a Ram Promaster City Mk1
How to Remove the Rear Light Fixture Cover of a Ram Promaster City Mk1
RAM Promaster City (2015-2022 / MK 1) This guide shows how to open the rear light fixture cover of the Ram Promaster City Mk1. To perform this operation, you need a small flathead screwdr…
Removing the Front Door Panel of the Ram Promaster City
Removing the Front Door Panel of the Ram Promaster City
RAM Promaster City (2015-2022 / MK 1) In today's video tutorial, we will see how to remove the front door panel of the Ram Promaster City in simple and quick steps. First, open the front …
How to Replace a Bulb on a Ram ProMaster City
How to Replace a Bulb on a Ram ProMaster City
RAM Promaster City (2015-2022 / MK 1) If you need to replace a front bulb on a Ram ProMaster City, follow these simple instructions. First, identify which bulb needs replacing (position l…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos