Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How to install rear tailgate assistance on RAM 1500/2500/3500.

RAM 3500 - Video tutorial

Model: RAM 3500 MK 4, DS, DJ - Years 2009-2019
Part: Checks and maintenance
Operation: How to install rear tailgate assistance on RAM 1500/2500/3500.

Installing this hydraulic assist piston on the RAM 3500 is very simple. However, it is advisable, contrary to what is indicated in the video, to do the installation over two days, allowing the glue on the bolt to dry overnight. After this step is completed, the entire installation will be easier and more durable. The hydraulic piston - it is a single piston for the rear door - can be found on Deezee. Com for $39.95 (+ shipping costs). The installation is truly very simple and does not present any difficulties. There is no need for any special tools or drills.


Posted on 1 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Ram 3500 1993-2002 - How to fix RAM 3500 intermittent wipers? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos