Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 3500
    4. : Checks and maintenance

RAM 3500 - Checks and maintenance

RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to install rear tailgate assistance on RAM 1500/2500/3500.
Installing this hydraulic assist piston on the RAM 3500 is very simple. However, it is advisable, contrary to what is indicated in the video, to do the …read all…
Posted on 1 July 2023 by ScegliAuto
RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to reset the oil warning light on a Dodge Ram 3500
In this short video tutorial today we are going to see how to reset the oil warning light on a 2012 Dodge Ram 3500. Doing this operation is really very simple, …read all…
Posted on 8 July 2022 by ScegliAuto
RAM 3500 (2019-2024 / DT, MK 5)
How to reset the oil light in the Ram 3500?
The video shows us how to reset the oil warning light in the Ram 3500. This operation can be carried out through the on-board computer, without connecting any …read all…
Posted on 24 May 2022 by ScegliAuto
RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to reset the service in the RAM 3500 pick-up?
In this tutorial we can see how to reset the service in the RAM 3500 pick-up, a very simple and fast operation. Obviously, before doing this, it will be …read all…
Posted on 17 April 2024 by ScegliAuto
RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to reset the oil service in the RAM 3500 pick-up?
In this video we can see how to reset the oil service in the RAM 3500 pick-up, a very simple and fast operation, to be followed only after having changed the …read all…
Posted on 8 April 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (3) Key (6) -board computer (6) Checks and maintenance (5) Brake discs (5) Headlight (6) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (3) Petrol filter (3) Diesel filter (2) Clutch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Gear oil (1) Engine oil (7) Brake pads (2) Pump (1) Door (1) Instrument cluster (2) Wheel (1) Fuse box (5) Outside rearview mirror (1) Windscreen wipers (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos