Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 3500
    4. : Car stereo

RAM 3500 - Car stereo

RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to disassemble the car stereo of the Dodge Ram 3500 Mk4
The guide shows how to disassemble the Dodge Ram 3500 Mk4 car radio. The removal of this element for the vehicle in question is quite simple since it is …read all…
Posted on 8 September 2022 by ScegliAuto
RAM 3500 (2009-2019 / MK 4, DS, DJ)
How to remove the radio from the Dodge RAM 3500 Mk4
The guide shows you how to remove the Dodge RAM 3500 Mk4 car stereo. The first operation is to disconnect the negative pole cable of the battery. At this point …read all…
Posted on 8 April 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (3) Key (6) -board computer (6) Checks and maintenance (5) Brake discs (5) Headlight (6) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (3) Petrol filter (3) Diesel filter (2) Clutch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Gear oil (1) Engine oil (7) Brake pads (2) Pump (1) Door (1) Instrument cluster (2) Wheel (1) Fuse box (5) Outside rearview mirror (1) Windscreen wipers (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos