Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the drive belt in the RAM 1500 pickup truck?

Model: RAM 1500 MK 4, DJ, DS - Years 2009-2019
Part: V-belt

In this tutorial, we can see how to replace the service belt in the RAM 1500 pickup truck, a very simple operation. In order to access the belt comfortably, we will need to lift the front side of the vehicle, taking all the necessary safety measures, of course. Let's start by going under the engine compartment, then slightly move the fan, grip the belt tensioner by its bolt, and rotate it inward to loosen the tension. Afterwards, we release the belt and position the replacement following the indicated pattern, moving the tensioner as done previously to facilitate the installation.

Posted on 9 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on a RAM 1500 Pickup?
How to Reset the Oil Service Light on a RAM 1500 Pickup?
RAM 1500 (2019-2026 / MK 5, DT) In this tutorial, you will see how to reset the oil service light on a RAM 1500 pickup, a very simple and quick operation. Before proceeding, ensure …
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
RAM 1500 (2019-2026 / MK 5, DT) If the AdBlue warning light has come on in the instrument panel of our RAM 1500 pick-up truck, it means that the liquid in the anti-pollution system …
How to replace the rear taillight on a RAM 1500 pickup truck?
How to replace the rear taillight on a RAM 1500 pickup truck?
RAM 1500 (2019-2026 / MK 5, DT) In this tutorial, we can see how to disassemble and replace the rear taillight on the RAM 1500 pickup truck. For this simple and quick operation, we …

How to Replace the Front Headlamp Bulbs on a Mazda 3

Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboard), and secure it with the prop rod. Locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the bulbs using a screwdriver. Install the new LED bulbs (ensuring the type and size are correct) and insert the bulb holder back into the headlamp housing. Refit all previously removed parts.

Watch the video!


by ScegliAuto

More videos