Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front shock absorber of the RAM Promaster?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Shocks

In order to replace the front shock absorber of the RAM Promaster, you need to lift the vehicle using a jack or a lift: once the vehicle is lifted, you can loosen the bolts that secure the wheel corresponding to the shock absorber to be replaced, removing it completely. This way, you can loosen the bolt that secures the shock absorber at the bottom, near the control arm. To loosen the bolts that secure it at the top, you will need to access the interior of the cabin and remove the corresponding dashboard covering. At this point, you can insert the new replacement parts, ensuring that everything functions correctly.

Posted on 13 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb on the RAM Promaster?
How do you replace the front headlight bulb on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the headlight bulb of the RAM Promaster, you need to open the hood to loosen the screws that secure the front grille of the vehicle. Once …
How do you replace the timing belt of the RAM Promaster?
How do you replace the timing belt of the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) In order to replace the timing belt of the RAM Promaster, you need to open the hood and then lift the vehicle so that the right front wheel and corre…
How do you replace the timing belt of the RAM Promaster?
How do you replace the timing belt of the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) The operation of replacing the timing belt on the RAM Promaster is carried out by lifting the vehicle, making sure that the right front wheel is not …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos