Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the 2020 Ram Promaster Rapid?

Model: RAM Promaster Rapid MK 1 - Years 2015-2024
Part: Fuse box

Essentially, the difference in the placement of the fuse boxes between the Ram Promaster and the Ram Promaster Rapid is negligible, as they are both located in the engine compartment, just as shown in the video, and to the left of the steering column. It is easy to know what they contain, as thanks to the fuse and relay diagrams, we can identify each one and understand their purpose, such as the fuel pump, headlights, and much more. It is also worth mentioning that the aforementioned diagrams are present in the same fuse boxes.

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse diagram located in the 2020 Ram Promaster Rapid?
Where is the fuse diagram located in the 2020 Ram Promaster Rapid?
RAM Promaster Rapid (2015-2024 / MK 1) The 2020 Dodge Promaster Rapid is a small commercial vehicle, equipped like all other vehicles, motorcycles, etc. with fuses, and consequently with f…
Where is the inertia valve switch located on the RAM Promaster Rapid?
Where is the inertia valve switch located on the RAM Promaster Rapid?
RAM Promaster Rapid (2015-2024 / MK 1) In this video we see the position of the inertia valve on a RAM Promaster Rapid: this vehicle has been in a crash and now won't start. The YouTuber h…
How to reset the oil light on RAM Promaster Rapid.
How to reset the oil light on RAM Promaster Rapid.
RAM Promaster Rapid (2015-2024 / MK 1) In this video tutorial we can see how to reset the oil light on Ram Promaster Rapid, following simple steps. When the oil change warning light comes …

Other guides you may be interested in

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos