Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. 1500
  6. : How to replace the fuel pump on the Dodge RAM 1500 Mk3

RAM 1500 - Video tutorial

Model: RAM 1500 D1, DC, DR, DM, DH, MK 3 - Years 2002-2009
Part: Fuel pump
Operation: How to replace the fuel pump on the Dodge RAM 1500 Mk3

The guide shows you how to do the Dodge RAM 1500 Mk3 fuel pump replacement. Disconnect the pump electrical connector from the bottom of the vehicle near the left rear wheel. Open the fuel cap and start the engine for a few minutes to drain all the fuel from the system. From the engine compartment, disconnect the battery and remove the air filter box. Remove the engine cover to access the engine fuel drain valve, located on the left side of the engine near the engine oil dipstick. Open the valve cap and place a container to collect the fluid, with a screwdriver or a probe pry the cap to drain the fuel. Disassemble the canister of the emission filter to lighten the tank. Unscrew the tank fixing bolts and lower it. Disconnect the hoses and completely remove the tank. Unscrew the pump fixing ring and replace it. Put everything back in place and start the engine to circulate the fuel.


Posted on 4 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ram 1500 2002-2009 - What problems does the RAM 1500 petrol pump have? Read Answer

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos