Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of a Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Headlight bulb

When it is necessary to replace the bulb of the right front headlight of a Renault Scenic, it is necessary to remove the headlight because there is no space to perform this operation with the headlight in its housing. After removing the headlight, it is necessary to place it on a work surface and open the cover of the light fixture by rotating it counterclockwise. Once the light fixture is open, disconnect the bulb from the connector and remove it. Insert the new bulb inside and connect the connector, then close the light fixture cover and continue with the installation of the headlight in its housing.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Renault Scenic 3
How to replace the front headlight bulb of the Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Replacing the left front headlight bulb of the Renault Scenic model mk3 is a very simple and quick operation to perform independently, also thanks to…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to replace the headlight bulb of the Renault Scenic
How to replace the headlight bulb of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Replacing the right front headlight bulb of the Renault Scenic MK3 model is a simple operation that can be done in a few minutes. To replace it, we n…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos