Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear bulbs of the Renault Trafic version 2

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Tail light

In this video we can see how to change the bulb of the rear lights on the Renault Trafic 2, we need to open the trunk, and unscrew the headlight block, unscrewing the three screws that fix it, then, leveraging on the bodywork with a screwdriver protected by a cloth, we will remove the optical group from the bodywork itself, removing the power connector. There is a plastic plate to remove, moving the tabs from the support; the bulbs inside are removed by pressing them and turning them a quarter turn. We mount the new bulb without touching the bulb with bare hands, following the reverse procedure. We reassemble the plate. We reattach the electrical connector and put the headlight back in its housing; we fix it with its three screws and the job is done.

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you change the rear brake pads on a RENAULT Trafic 3?
How do you change the rear brake pads on a RENAULT Trafic 3?
Renault Trafic (2014-2026 / MK 3) Changing the rear brake pads on a Renault Trafic 3 is an operation that requires patience and a bit of manual skill. Start by lifting the car with a …
Removal of the headlight of the Renault Trafic - Opel Vivaro
Removal of the headlight of the Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) In today's video tutorial we will see how to remove and replace the headlight, together with the bulbs, of the Renault Trafic, but also of the Opel V…
How to replace the bulb of the air conditioning and heating lights on the Renault Trafic
How to replace the bulb of the air conditioning and heating lights on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Replacing the bulb of the air conditioning and heating panel on the Renault Trafic is a task that can be done independently. To begin, unscrew the tw…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos