Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the rear brake pads on a RENAULT Trafic 3?

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Brake pads

Changing the rear brake pads on a Renault Trafic 3 is an operation that requires patience and a bit of manual skill. Start by lifting the car with a jack and removing the rear wheels. Then, unscrew the bolts of the brake caliper, which holds the pad in place. Once the caliper is removed, take out the worn pads. Before putting in the new ones, make sure that the caliper piston is pushed back, perhaps with a specific tool. Now, place the new pads in their housing, reattach the caliper and tighten the bolts. Check the brake fluid level and take a test drive to make sure everything is working correctly. Good job!

Posted on 10 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Changing Front Discs and Pads on Renault Trafic II
Changing Front Discs and Pads on Renault Trafic II
Renault Trafic (2001-2014 / MK 2) In this video, see how to change the front discs and pads on a Renault Trafic II: open the bonnet and remove the cap from the brake fluid reservoir, …
How to Change the Key Battery of a Renault Trafic 3
How to Change the Key Battery of a Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) To change the battery of your Renault Trafic third series key yourself, follow the procedure described in this guide. First, ensure you have a flat-h…
How to Remove the Rear Seats of a Renault Trafic
How to Remove the Rear Seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos