Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset of a 2016 Renault Koleos

Model: Renault Koleos MK 2 - Years 2016-2024
Part: Warning light – error code

Through this very short video guide, we can see how to reset the service light of a Renault Koleos, a specific model of the second generation registered from the year 2016 onwards. Let's start the reset procedure by turning on the car's instrument panel, then, using the controls on the right steering wheel keypad, we scroll through the various options on the speedometer display until we reach the "service interval" option, then press and hold the "OK" button to enter it. Once done, press and hold the "OK" button again on the engine oil change interval until the reset is complete as shown in the video.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Renault Koleos
Resetting the service light on a Renault Koleos
Renault Koleos (2016-2024 / MK 2) Thanks to this useful and very short video guide today we can see all the necessary steps to reset the service light on a second generation Renault K…
How to reset the service light on the Renault Koleos 2
How to reset the service light on the Renault Koleos 2
Renault Koleos (2016-2024 / MK 2) If you own a second edition Renault Koleos and want to learn how to correctly perform a manual reset of the service light, all you need to do is care…
To reset the service indicator of the Renault Koleos 2020.
To reset the service indicator of the Renault Koleos 2020.
Renault Koleos (2016-2024 / MK 2) In this new mini guide dedicated to all owners of a second-generation Renault Koleos (year 2020), we will describe the various steps necessary to com…

Other guides you may be interested in

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos