Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil on a Renault Koleos

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

See other generations:
Video tutorial

How to replace the engine oil on a Renault Koleos? Follow this guide: lift the car on a column lift or jack, unscrew the bolt from the oil sump, allowing the oil to drain into a container (tighten the bolt at the end of the draining). Use a strap wrench to unscrew the oil filter, remove it, and fit a new one, ensuring it adheres well around the thread.

Lower the car back to the ground, then lift the front bonnet, securing it. Finally, refit the oil filter cap, tighten the screws, and top up with new oil.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil on a Renault Koleos
How to Change Engine Oil on a Renault Koleos
Renault Koleos (2008-2015 / MK 1) This guide shows you how to replace the engine oil in a Renault Koleos: position your car on a column lift or jack and raise it to a comfortable heig…
Resetting the Service Light on the Renault Koleos
Resetting the Service Light on the Renault Koleos
Renault Koleos (2008-2015 / MK 1) This brief and simple guide explains the procedure to reset the service light for the routine maintenance oil change on the Renault Koleos. First, ge…
How to Remove the Rear Bumper of the Renault Koleos
How to Remove the Rear Bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a complex task that requires a professional's help. In reality, it is …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos