Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil of a Renault Megane IV

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Engine oil

In this video we see how to change the motor oil of a Renault Megane IV: first we open the refueling cap inside the engine compartment, then we move under the car. We equip ourselves with a large basin capable of collecting the used oil that will come out of the oil pan, and then we will dispose of it at an authorized center. In the footage we can see the cap to be unscrewed. It is advisable to also change the cap and its gasket when changing the oil. Let the used oil drain well, then close it with the new cap and refill with 5.5 liters of synthetic oil SAE 5W40. Fill up to 90% and then take the measurement; then finish filling with small amounts, because the oil should never exceed the "max" line.

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane 4, Megane IV) The steps necessary to change the engine oil on a Renault Megane 4 are quite few. Here they are listed: 1) lift the car on a ramp or on axle stands; …
Renault Megane (1995-2003 / Megane 1) Changing the engine oil on a Renault Megane? Here’s how to change the oil. Lift the car on a column lift or jack, unscrew the plug of the oil sump wi…
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you will learn how to change the oil and filter on a Renault Megane III 1.6 DCi: start by removing the undertray to access the engine …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos