Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Renault Scenic?

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Headlight bulb

The procedure for replacing the headlight bulb on the Renault Scenic is carried out by opening the hood, so that it is possible to have access to the components inside the engine compartment: here it will be possible to locate the internal protective panel of the optical group, which must be removed in order to disconnect the connector connected to the corresponding bulb. At this point, it will be possible to connect the new bulb to the corresponding connector, so that it can then be inserted into its housing and close the headlight by reinserting the panel.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…
How to Replace the Front Headlamp Bulb on the Renault Scenic?
How to Replace the Front Headlamp Bulb on the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the front headlamp bulb on the Renault Scenic, open the bonnet to access the rear of the headlamp that needs the bulb replaced. Here, you …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos