Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tire pressure warning light

See other generations:
Video tutorial

Follow these steps to reset the tyre pressure on your Renault Megane. Turn on the instrument panel with the key card, press the button located near the steering wheel, and find the menu that displays tyre maintenance as shown in the video.

Based on the menu prompt, press and confirm the reset. Before resetting, carefully adjust all four tyres.

Further check the tyre pressure using the pressure gauge from the compressor. Finally, double-check everything and switch off the instrument panel after maintenance.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Renault Megane
How to Reset the Tyre Pressure Warning Light on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will discover the steps that will allow us to reset the tyre pressure warning light on a Renault Megane; before recalibrating the TPMS senso…
How to reset the tyre pressure warning light on the Renault Megane?
How to reset the tyre pressure warning light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) To reset the tyre pressure warning light on the Renault Megane, inflate the tyres until they reach the optimal pressure value: this value is indicate…
How to Reset the Tyre Pressure Warning Light on the Renault Megane?
How to Reset the Tyre Pressure Warning Light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To reset the tyre pressure warning light on the Renault Megane, first inflate the tyres to the correct pressure value: this value is indicated on the…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos