Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Side Trim of the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Removing the outer side trim of the door on a Renault Megane 3 is a simple task, necessary if you need to repair the door from a dent. First, open the affected door.

Second, unscrew the side nut near the door latch. Third, close the door to remove the trim.

Fourth, pull the trim off, taking care not to damage the internal clips. Finally, remove the external hooks.

You can perform the same operation on all other doors as needed.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Renault Megane
How to Replace the External Door Handle on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's guide provides instructions on how to remove and replace the external door handle on the front door of a Renault Megane. First, open the fron…
Replacement of the Temperature Sensor on a Renault Megane
Replacement of the Temperature Sensor on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here are the brief instructions that will allow you to remove and replace the external temperature sensor on the Renault Megane. First, locate the ex…
How to Remove the External Handle of the Renault Megane?
How to Remove the External Handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door and detach the seal covering the entire perimeter of the door at the handle height…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos