Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Rear Headlamp on Your Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

In this guide, learn how to replace the rear headlamp on your Renault Clio. Open the boot and access the compartment on the trim using a screwdriver. Unscrew the screws located at the side of the headlamp, remove the plastic cover, and disconnect the headlamp from the bodywork (disconnect the power connectors).

To remove the light on the tailgate: remove the securing pins on the plastic trim inside the tailgate. Once the headlamp is free from any constraints, detach it from the tailgate (disconnect the relevant power connectors).

Finally, refit the headlamp and reverse the assembly of the other components.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Replace Rear Headlamp Bulb on Renault Clio
Replace Rear Headlamp Bulb on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replace the blown bulbs of the rear headlamp on a Renault Clio. Lift the boot and secure it with the prop rod. Locate the inspection cap of the headl…
How to Replace the Front Headlamp Bulbs on a Renault Clio
How to Replace the Front Headlamp Bulbs on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Learn how to replace the front headlamp bulbs on a Renault Clio. Open the bonnet (by pulling the lever located at the bottom right of the dashboard) …
How to Replace the Rear Headlamp Bulbs on the Renault Clio 4
How to Replace the Rear Headlamp Bulbs on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, learn how to remove and replace the rear headlamp bulbs on the fourth series Renault Clio by following these simple steps. First, open…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos