Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter on the Renault Clio model 2 is very simple. To replace the filter, open the engine bonnet and then remove the rubber support tape.

To do this, pull the metal part with one hand while rotating the air filter flange with the other. Next, slide out the air filter and insert the new filter.

Reinsert the flange, aligning the tabs, and then rotate it back, reattach the tape, and close the bonnet. To conclude the operation, start the vehicle once finished to check if the replacement was successful.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
Replacing the Air Filter on a Renault Clio
Replacing the Air Filter on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How do you replace the air filter on a Clio? Let's look at removing the engine air filter from its designated space. Open the engine bay and locate w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos