Do it yourself
Frequently asked questions about cars and motorcycles

Check the pin-out of the fuel pump control relay of the Renault Clio 1.8 16V.

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuse box

In this video we see the PIN OUT, that is the arrangement and function of each individual contact (pin) present on an electrical connector. In this case, we focus on Relay no. 23 of the fuel pump of the Renault Clio 1.8 16V. Here we have four cables, where contact 30 is a direct positive; contact 87 is an output that, through a junction, feeds the four injectors, the idle control valve, and through pins B1 of the R67B plug, also feeds the fuel pump. Pin 85 goes to pin 6 of the control unit, while pin 86 is a key-on contact. We then see the pairing with the cables and their arrangement.

Posted on 8 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, we can see how to connect the smartphone to the onboard computer of the Renault Clio using Bluetooth, a very simple and fast operat…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we see how to check the coolant level of a Renault Clio: first, the vehicle must be turned off and cold, and it must be on a flat surf…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The Renault Clio IV does not have a rear camera function natively: it needs to be activated via the MediaNav system. Go to Menu/Settings and enter 't…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos