Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan of the Renault Scenic

Model: Renault Scenic Scenic 1, MK 1, RX4 - Years 1993-2003
Part: Blower motor

Today we will discover the main instructions that will allow us to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get on board the vehicle, on the front passenger side, and start to locate the cabin fan, located under the glove compartment; then we unscrew its fixing screws found on the sides and disconnect the electrical power connector to remove it, as shown in the video. At this point, we carry out the repair or replacement of the fan with the new one, finally verifying its correct operation!

Posted on 17 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Renault Scenic
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew t…
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) If the cabin fan speed does not change despite adjusting the speed, it means that the resistor controlling the fan speed is damaged: to carry out thi…
Guide to replacing the cabin fan of the Renault Scenic
Guide to replacing the cabin fan of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get on board…

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos