Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in a Renault Scenic?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Blower motor

To replace the cabin fan in a Renault Scenic, you will need to completely dismantle the dashboard to access the underlying components. To do this, pry off the trims and loosen all the screws underneath. This will allow you to remove the panels that make up the dashboard: the fan will be located at the rear centre and will need to be freed from the fixing screws and corresponding power cables. The new fan can then be inserted and connected, covering everything back with the panels.

Posted on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin fan of the Renault Scenic
Replacement of the cabin fan of the Renault Scenic
Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) Today we will discover the main instructions that will allow us to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get …
How to Replace the Cabin Fan of the Renault Scenic?
How to Replace the Cabin Fan of the Renault Scenic?
Renault Scenic (2003-2009 / MK 2, Scenic 2) The cabin fan of the Renault Scenic is located inside the dashboard: it can be found at the top of the dashboard, immediately behind the instrument c…
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) If the cabin fan speed does not change despite adjusting the speed, it means that the resistor controlling the fan speed is damaged: to carry out thi…

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos